Differences

This shows you the differences between two versions of the page.

--- the_janome_2000_cpx [2015/06/02 10:26]
hilde_beerens
+++ the_janome_2000_cpx [2015/06/03 00:13]
hilde_beerens
@@ Line 18: / Line 18: @@
 The manual recommends switching to TIGHT when skipped stitches are occurring. Generally speaking the TIGHT setting seems best with heavier fabrics and multiple layers. The SOFT setting seems better suited to lightweight fabrics, to avoid tunnelling when hemming with the left needle piercing only one layer of fabric and when using polyester or woolly nylon stretch thread in the looper.
+Unless stated otherwise, my pressure foot knob is set at 10.5 millimetres or 13/32" above the machine.
+{{:janome_cover_pro_2000_cpx:pressure_foot_knob.jpg?800x600|}}
 ===== Hemming average cotton lycra/elastane knits =====
@@ Line 96: / Line 98: @@
 ===== Reverse coverstitching hems =====
-You may want to check out more about reverse stitching hems [[Hemming#Preparing for reverse stitching|here]]. When I reverse stitch a hem, both needles go through the same number of layers and for the next sample I used these
+You may want to check out more about preparing for reverse stitching hems [[Hemming#Preparing for reverse stitching|here]] first. When I reverse stitch a hem, both needles go through the same number of layers and for the next sample I used these
 SETTINGS for the Janome Cover Pro:

Coverstitching